• Skip to main content
  • Skip to header right navigation
  • Skip to site footer

Viewpoint Balustrades

Contemporary stainless steel, glass & tension wire balustrade and railing systems

  • Services
  • Systems
    • Wire Infill Balustrade
      • Horizontal Wire Balustrade
      • Vertical Wire Balustrade
      • Glass & Wire Juliet Balconies
    • Glass Infill Balustrade
      • Stainless Steel Posts with Glass Infill
      • Frameless Glass Balustrade
      • Glass Mounted on Bosses
      • Glass & Wire Juliet Balconies
    • Stainless Steel Handrails
  • About Us
  • Contact

Horizontal Wire Balustrade

Horizontal tension wire balustrades give an open spacious feel. Easy to look after and great value.

Stainless Steel Horizontal Wire Balustrade
48mm Stainless Steel Tube with 4mm Horizontal Tension Wires

STAINLESS STEELWORK – Our systems come in two grades of stainless steel, 304 grade for internal applications and a 316 marine grade for external applications.

DIAMETER – The round tube comes in two sizes, 42.4mm for a light system and a 48.3mm diameter for a stronger system. The 48mm is generally but not exclusively used for our outdoor projects. (40 x 40mm square box section is also available)

FINISH – Available in a brushed satin finish or bright polished. We recommend a bright polished finish in coastal locations.

TENSION WIRES – Our standard would be a 4mm 316 marine grade version as can be seen in most of our photos. We have a fully equipped rigging shop and as such we can offer different diameters and terminations.

TOP RAIL – In most designs a top rail is essential on a tension wire system as this rail forms a frame able to resist the tension loads. This rail can be dispensed with on some low load systems such as ground level decking areas where the system is a feature and not acting as a guard rail.

MOUNTING – The most common is a welded base plate with rosette cover for floor, deck mounting. Side mountings in various formats can cater for most situations.

Face mounted stainless steel horizontal wire balustrade
Stainless steel horizontal wire balustrade. Handrail on spigot saddles.
Garden deck stainless steel horizontal wire balustrade.
Garden deck stainless steel horizontal wire balustrade.
Garden deck powder coated stainless steel horizontal wire balustrade.
Garden terrace stainless steel horizontal wire balustrade.
Garden terrace stainless steel horizontal wire balustrade.
Commercial stainless steel horizontal wire balustrade.

MADE TO MEASURE – All of our systems are of a modular construction and are made to measure. Posts base plates are welded but items such as rail elbows, saddles etc are bonded in place during installation giving a smooth finish.

BUILDING REGULATIONS – NOTE: UK Building Regulations prevent the use of any climbable system infill such as horizontal wires on domestic balconies and certain areas with a drop greater than (600mm domestic applications). As such this system is generally suitable for commercial areas without small children; garden landscaping projects; domestic areas that do not need planning permission such as low level decks below.  Vertical wires and glass will comply with the regulations.

LOAD RATING –  We have test data available on request for all of our systems. All versions meet the  rating requirements for domestic use with some meeting higher ratings for commercial use.

More Wire Options
Glass Options

Viewpoint Balustrades

Please feel free to contact us if you do not see what you are looking for. 
We appreciate all enquiries and are always happy to chat over any potential project.

Contact

Address:

Viewpoint Balustrades
Orchard House
Milltown
Barnstaple
EX31 4HG

Email:

info@viewpointbalustrades.co.uk

Phone:

07905 625749

Socials:

  • Facebook
  • Instagram

Copyright © 2025 · Viewpoint Balustrades · All Rights Reserved